Winter USB Electric Heated Grip Covers for Motorcycle Handlebars
Winter USB Electric Heated Grip Covers for Motorcycle Handlebars
| Minimum Qty | Discount |
|---|
Couldn't load pickup availability
COLD-WEATHER RIDING · WRAP-AROUND WARMTH
USB Heated
Grip Covers
Add warmth where you hold on.
Give compatible handlebar grips a warmer feel with a pair of powered fabric covers. Wrap them around your existing grips, connect a suitable USB supply, and choose from three heat levels before heading out.
5V USB-A input · Low / Medium / High · Black
Three heat settings
Choose Low, Medium, or High using the inline control.
USB-powered warmth
Connect to a compatible 5V USB power source during use.
Wrap-around fitting
Secure the covers around suitable existing handlebar grips.
A coordinated pair
Two black covers connect to one inline controller.
01 / COLD-WEATHER COMFORT
Bring warmth to your everyday grip.
Cold handlebars can make a winter ride feel less comfortable. These covers add a heated fabric layer over suitable existing grips, bringing warmth to the area your hands hold.
The wrap-around format makes it straightforward to add the covers to a compatible setup. Check the available grip space and control clearance before fitting.
02 / THREE-LEVEL CONTROL
Choose a comfortable level of warmth.
Low
Start with a gentler level and check how the warmth feels.
Medium
Adjust upward if you want more warmth at the grips.
High
Use the stronger setting only while it remains comfortable.
The inline controller offers three selectable settings. Set the level while stationary and lower the heat or switch off if the covers feel too hot.
03 / WARM-UP
A quick warm-up for a cold start.
The product’s stated warm-up time is approximately 30 seconds. Connect the covers to the specified power supply and give them time to warm before checking the setting.
Actual warm-up and perceived warmth depend on the USB supply, outdoor temperature, wind, and gloves. Adjust the level to suit the conditions and your comfort.
04 / CONSTRUCTION
Fabric details, up close.
A soft outer surface, stitched edges, and wrap-around fastening form the covers. The inner lining sits against the existing grip, while the fastening keeps the cover positioned around it.
After fitting, check that neither cover twists or slips during normal grip movement. Keep the USB connection dry and follow the supplied care directions.
05 / INSTALLATION OVERVIEW
Wrap. Secure. Connect.
1. Wrap
With the vehicle stationary, position one cover around each clean, dry grip.
2. Secure
Close the fastenings firmly. Route the cables so they stay clear of levers, moving parts, and hot surfaces.
3. Connect & check
Connect a compatible USB supply, select a heat level, and check steering and control movement before use.
On a motorcycle, confirm that the throttle returns freely and the cables allow full steering movement. Covers add thickness to the grips, so check that all controls remain easy to operate.
06 / YOUR SETUP
Check power and fit before ordering.
The pictured specification lists a 5V USB Type-A input. A suitable external USB power source is required during use; the covers receive power through the attached cable.
Check your existing grips, cable-routing space, and USB supply against the instructions for the product. Fit depends on your handlebar and control layout.
07 / HOW IT WORKS
Powered heat, shown side by side.
The illustration below shows the difference between an unheated grip and an actively heated cover. It is a visual explanation of the heating function.
Displayed heat effects and temperature examples are illustrative. Actual surface temperature varies with the selected setting and operating conditions.
Product details
| Product | USB electric heated handlebar grip covers |
|---|---|
| Color | Black |
| Power input | 5V USB Type-A |
| Heat levels | Low / Medium / High |
| Control | Inline control unit |
| Fitting | Wrap-around covers for compatible existing grips |
| Listed weight | Approx. 300g / 10.6oz |
| Power source | External USB supply required during use |
| Package includes | 1 × set with two heated grip covers, connecting cable, USB plug, and inline controller |
Care for your heated covers.
Switch off, unplug, and allow the covers to cool before cleaning or storing them. Inspect the cable, connectors, stitching, and fastening regularly, and stop using the set if it is damaged.
Follow the supplied operating and cleaning instructions. Adjust the heat while stationary. Color may vary slightly with lighting and screen settings.
Make a warmer grip part of your ride.
Wrap-around fitting. Three heat levels. USB-powered convenience.